West Mountain Radio RIGblaster pro, Руководство пользователя

Страница: 27 / 38

26
RJ45 MODULAR STYLE MICROPHONE JUMPERING
Plug your RJ45 mic. in the back “mic out” (R16) jack of the
RIGblaster pro . Using the supplied mic.
Cable, screw the 8 pin plug in the front MICROPHONE CONNECTOR (F1) of the RIGblaster pro and
plug the RJ45 end into your radio RJ45 mic jack. Be sure to use the correct jumpering for your radio as
follows and observe that PTT & MIC are crisscrossed INPUT to OUTPUT.
ICOM with RJ45 Microphone Connectors
(This jumpering is for Icom 706 (all versions), IC-7000 and most, but not all ICOM FM rigs
INPUT SIDE
Pin #
1 Blue Shunt Jumper to Pin 1 - OUTPUT Side
2 White Jumper to PTT GND – INPUT Side
3 White Jumper to MIC - OUTPUT Side *
4 White Jumper to MIC GND – INPUT Side
5 White Jumper to PTT - OUTPUT Side *
6 Blue Shunt Jumper to Pin 6 - OUTPUT Side
7 Blue Shunt Jumper to Pin 7 - OUTPUT Side
8 Blue Shunt Jumper to Pin 8 - OUTPUT Side
OUTPUT SIDE
Pin #
2 White Jumper to PTT GND – OUTPUT Side
3 White Jumper to MIC - INPUT Side *
4 White Jumper to MIC GND – OUTPUT Side
5 White Jumper to PTT - INPUT Side *
KENWOOD with RJ45 Microphone Connectors and most, but not all Kenwood FM rigs
INPUT SIDE
Pin #
1 Blue Shunt Jumper to Pin 1 - OUTPUT Side
2 Blue Shunt Jumper to Pin 2 - OUTPUT Side
3 White Jumper to PTT GND – INPUT Side
4 White Jumper to PTT - OUTPUT Side *
5 White Jumper to MIC GND – INPUT Side
6 White Jumper to MIC - OUTPUT Side *
7 Blue Shunt Jumper to Pin 7 - OUTPUT Side
8 Blue Shunt Jumper to Pin 8 - OUTPUT Side
OUTPUT SIDE
Pin #
3 White Jumper to PTT GND – OUTPUT Side
4 White Jumper to PTT - INPUT Side *
5 White Jumper to MIC GND – OUTPUT Side
6 White Jumper to MIC - INPUT Side *