West Marine VHF500, Руководство пользователя

Страница: 28 / 72

28
Note: If there is not any data registered in the directory you cannot
proceed to the 2nd step. See the SETUP section for directory,
setup instructions.
Select an open (unused) working channel first, then make the
call. After the acknowledgment, both radios tune to the
previously selected channel.
1-B. GROUP CALL
This function allows the user to contact a group of specific vessels using
DSC and to automatically switch to a desired channel. This function
allows you to transmit a DSC signal with group MMSI.
1. First you must select an open channel.
2. Press SELECT briefly at
DSC CALL
(To enter DSC CALL , see page 26).
INDIVIDUAL
appears.
3. Press CH
▼
briefly once to select
GROUP .
4. Press SELECT briefly. The MMSI code
appears, and you can now call the group
members. Press
SELECT briefly to call.
When you finish calling, the radio returns
to the channel display screen.
UT01920ZB_0 8/16/05 12:34 PM Page 28