22
1.
Press
WX/ALERT
for more than two
seconds when WX ALERT is Off.
The radio turns the WX ALERT On and
the icon
appears.
2.
If the radio receives a 1050Hz tone, the
icon will blink every other second
and the alert tone will ring.
In the area where SAME is
broadcasted, the following is displayed.
3.
When a WX ALERT signal is received,
all other functions are canceled and the
radio remains on the selected weather
channel.
When the radio is in Scan mode,
scanning the weather channel every 7
seconds, the SAME signal is not
decoded. To decode the SAME signal, the radio should be on an
active weather channel.
In order to stop the alert press any key briefly. If you press any
key briefly once more, the alert icon disappears.
The
icon indicates the Weather Alert mode is activated. To activate
the Weather Alert mode:
The Weather Alert mode can be activated to alert you of dangerous
weather. When Weather Alert is turned On, and a warning signal is
received, an emergency siren will sound at full volume, regardless of the
volume setting. When the signal stops, you will hear the active weather
channel broadcast at the normal volume setting.
Note:
See SETUP mode to program up to 10 FIPS codes.
Note:
The radio must be tuned to an active weather channel to
decode the SAME signal. This is necessary because the
SAME signal is only broadcast in the very beginning of the 10
second Weather alert tone by National Weather Service.
UT01920ZB_0 8/16/05 12:34 PM Page 22
Содержание VHF500
Страница 1: ...UT01920ZB_0 8 16 05 12 34 PM Page 1...
Страница 72: ...UT01920ZB_0 8 16 05 12 34 PM Page 72...