![background image](http://html1.mh-extra.com/html/west-industries/laserline/laserline_instruction-manual_959485011.webp)
Before removing CO2 Cartridge from adapter,
be sure to expel all remaining CO2 or damage
to the O-Ring may result.
(To expel CO2, dry fire until remaining CO2 is expelled)
Troubleshooting
CO2 Leak Related Problems:
1.
If you can her CO2 leaking once the CO2 has been
installed, you may need to pull slightly back on the
cocking knob or remove the CO2 then turn the
velocity control knob to the low velocity position and
then repeat the CO2 loading process.
2.
Check to make sure the O-Ring did not fall out from
the CO2 adapters Piercing pin.
Dart doesn’t fly properly:
1)
Dart may be bent or damaged.
(Replace Dart)
2)
If the Darts foam tip or foam tail piece becomes lose,
re glue with Cyanoacrylate.
(super glue)
3)
CO2 may be low.
4)
Pull Line MUST be attached to the Dart for proper
flight stabilization.
5) Pull line may be low and catching due to collapsed
spool.
For any other issues please contact manufacture,
servicing may be required.
Содержание LaserLine
Страница 13: ...Elevation Adjustment screw Windage ...