Wessex RMX TRIPLE 680 Скачать руководство пользователя страница 45

Страница: 45 / 50

IMPORTANT!

P.T.O. drive shafts must only be used for their intended purpose.

P.T.O. drive shafts are designed for specific machine types and power requirements.
They must not be replaced by other models.
Ensure that the P.T.O. drive shaft is securely connected.

Only use a completely protected drive system:

P.T.O. drive shaft with complete guard and complementary guard on tractor and
implement. A complete guard is essential in all working positions.

LUBRICATION

Lubricate with quality grease before starting work

and every 8 operating hours.

IMPORTANT:-

Lubricate P.T.O. guard bearings. The universal joint cover at each

end may need retracting to access grease nipples.

Clean and grease the P.T.O. drive shaft before each

prolonged period of non-use.

Grease the guard tubes in winter to prevent freezing.

For more detailed information on P.T.O. maintenance refer to the

handbook provided, zip tied to each P.T.O. shaft on delivery.

COUPLING THE PTO SHAFT

Clean and grease the PTO and PIN

Q.-d pin

Press q.-d. pin and simultaneously push PTO
drive shaft onto PTO until pin engages.

PTO SHAFT OPERATION AND MAINTENANCE

Содержание RMX TRIPLE 680



















































Результаты поиска

Содержание RMX TRIPLE 680

Отзывы:

Похожие инструкции для RMX TRIPLE 680

Бренды по названию

Популярные бренды

Wessex RMX TRIPLE 680, Руководство по эксплуатации

Результаты поиска

Содержание RMX TRIPLE 680

Отзывы:

Похожие инструкции для RMX TRIPLE 680

Бренды по названию

Популярные бренды