Weslo Pursuit Easy 100 Скачать руководство пользователя

Страница: 13 / 20

HOW TO USE THE MANUAL MODE

Note: The buttons on the console are located on the

dots next to the text (see the drawing on page 12).

Make sure to press the dots when you are instructed

to press a button.

1. Turn on the console.

To turn on the console, press the On/Reset button

or begin pedaling. The display will light and the

console will be ready for use.

2. Select the manual mode.

When you turn on

the console, the

manual mode will

be selected. If

you have selected

a pace workout,

reselect the man-

ual mode by

pressing the

Workout Select

button repeatedly

until zeros appear in the display.

3. Begin pedaling and change the resistance of

the pedals as desired.

As you pedal, adjust the resistance of the pedals

as desired by turning the resistance knob.

4. Follow your progress with the display.

The display can show the following workout infor-

mation:

RPM Meter

—The

RPM meter on the

right side of the

display provides a

visual representa-

tion of your

approximate ped-

aling pace in

revolutions per

minute (rpm). As

you increase or decrease your pedaling pace, indi-

cators will appear or disappear in the RPM meter.

Time

—This mode shows the elapsed time. Note:

When a pace workout is selected, the display

shows the time remaining in the workout instead of

the elapsed time.

Distance

—This mode shows the distance you

have pedaled, in miles or kilometers.

Calories

—This mode shows the approximate

number of calories you have burned.

Pulse

—This mode shows your heart rate when

you use the handgrip pulse sensor.

Speed

—This mode shows your pedaling speed, in

miles per hour (mph) or kilometers per hour

(km/h), and in revolutions per minute (rpm).

Scan

—This mode shows alternating time and dis-

tance, calories and pulse, and speed information.

Note: The pulse information will appear only when

you are using the pulse sensor.

When you turn on the console, the scan mode will

be selected automatically. One indicator will

appear below the word SCAN to show that the

scan mode is selected, and other indicators will

show which information is currently displayed (see

the drawing at the left). Note: If you have selected

a different mode, press the Display button repeat-

edly to reselect the scan mode.

Press the Display button repeatedly to view the

following exercise information for continuous dis-

play:

• Time and speed in miles per hour or kilometers

per hour

• Distance and speed in revolutions per minute

(rpm)

The indicators will show which mode is selected.

Make sure that there is not an indicator below the

word SCAN.

Indicators

RPM Meter

Содержание Pursuit Easy 100





















Результаты поиска

Содержание Pursuit Easy 100

Отзывы:

Похожие инструкции для Pursuit Easy 100

Бренды по названию

Популярные бренды

Weslo Pursuit Easy 100, Руководство пользователя

Результаты поиска

Содержание Pursuit Easy 100

Отзывы:

Похожие инструкции для Pursuit Easy 100

Бренды по названию

Популярные бренды