Weslo Pursuit 4.8, Руководство пользователя

Страница: 8 / 20

8
8. Make sure that all parts are properly tightened before you use the exercise cycle. Note: After assembly is
completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor.
7. Identify the Left Pedal (10), which is marked with a
sticker. Using an adjustable wrench, firmly tighten
the Left Pedal counterclockwise into the left arm of
the Crank (12). Tighten the Right Pedal (not shown)
clockwise into the right arm of the Crank.
Important: Tighten both Pedals as firmly as pos-
sible. After using the exercise cycle for one
week, retighten the Pedals. For best performance,
keep the Pedals tightened.
Adjust the strap on the Left Pedal (10) to the
desired position, and press the end of the strap
onto the tab on the side of the Left Pedal. Adjust the
strap on the Right Pedal (not shown) in the same
way.
7
10
Tab
12
6. While another person holds the Console (5) near
the Upright (2), connect the console wire harness to
the Upper Wire Harness (56).
Push the excess wire downward into the Upright
(2). Attach the Console (5) to the Upright with four
M5 x 16mm Self-tapping Screws (52).
Be careful to
avoid pinching the wires.
5
6
2
52
56
Console Wire
Harness
Be careful to
avoid pinching
the wires