6
2. While another person lifts the back of the Frame (1),
attach the Rear Stabilizer (28) to the Frame with
two M10 x 75mm Carriage Bolts (34) and two M10
Locknuts (33).
28
1
2
33
33
3. The Console (23) requires four “AA” batteries (not
included); alkaline batteries are recommended.
Press the tab on the battery door and remove it.
Insert four batteries into the Console as shown.
Make sure that the batteries are oriented as
shown by the markings on the battery door.
Then, reattach the battery door.
23
Batteries
Battery
Door
Tab
3
4. While another person holds the Console (23) near
the Upright (2), connect the console wire to the
Upper Wire (44). Insert the console wire and the
Upper Wire into the Upright.
Tip: Avoid pinching the console wire or the
Upper Wire (44).
Attach the Console (23) to the
Upright (2) with four M6 x 18mm Screws (43).
4
23
2
44
Console Wire
43
34
