Install
Page 1
620-8587 Rev. C
HIIT Console Wall Power Upgrade Install Instructions
Applies to: Airfit, Airfit UB, HIIT Bike, HIIT UB, HIITMill, HIITMill X, HIIT Rower
Enhanced Images:
Pictures can be zoomed in to any level for detail.
Use the standard zoom tools for your platform to zoom in.
HIIT UB
STEP 1: Remove the mast grommet then use a
3mm allen key to remove the two (2) M6 x 16mm
screws securing the user right shroud to the frame.
STEP 2: Remove the user right side shroud by us-
ing a #2 phillips screwdriver to remove the three
(3) #8-18 x 1.25” screws then use a 3mm allen
key to remove the two (2) M5 x 16mm screws.
Finally, use a 5mm allen key to remove the one
(1) M8 x 20mm screw securing the shroud to the
frame.
STEP 3: Connect the end of the HIIT Console Wall
Power adapter to the end of the Console Power
Cable
STEP 4: Replace the user right side shroud removed
in Step 2, then route the Console Power Cable down
the frame and out of the bottom of the shroud - as
indicated by the bold line. Use a cable tie to secure
the Console Power Cable to the frame, indicated by
the arrow Finally, connect the power adapter to the
Console Power Cable.
