Weslo 831.21832.0, Руководство пользователя

Страница: 10 / 24

10
11
25
24
Tab
31
11. Identify the Left Pedal (24), which is marked with a
“Left” sticker. Firmly tighten the Left Pedal counter-
clockwise into the left arm of the Crank (31).
Tighten the Right Pedal (not shown) clockwise into
the right arm of the Crank. IMPORTANT: Tighten
both pedals as firmly as possible. After using
the exercise cycle for one week, retighten the
pedals. For best performance, keep the pedals
tightened.
Adjust the Left Pedal Strap (25) to the desired posi-
tion, and press the end of the Left Pedal Strap onto
the tab on the Left Pedal (24). Adjust the Right
Pedal Strap (not shown) in the same way.
12. Make sure that all parts are properly tightened before you use the exercise cycle. Note: Some hardware
may be left over after assembly is completed. Place a mat beneath the exercise cycle to protect the floor.
13
36
10
10. While another person holds the Upright (13) near
the Frame (1), connect the Upper Wire Harness
(36) to the Lower Wire Harness (8).
Tip: Do not pinch the Wire Harnesses (8, 36).
Slide the Upright (13) onto the Frame (1). Attach
the Upright with three M8 x 25mm Button Screws
(33) and three M8 Split Washers (59).
8
33
33
59
59
1
Do not pinch the
Wire Harnesses (8, 36)
during this step