WESAUDIO
3/15/17
_MIMAS USER MANUAL REV4
15
1)
Connection status: Show current status of connection:
a.
ON – Connection is established.
b.
OFF – Connection is NOT established.
c.
Connecting – Connection process is ongoing. If “Connecting” state is visible for longer
period of time (more then 5 seconds), and plugin has no control over the unit, that would
mean:
i.
HW unit is no longer connected to your Workstation.
ii.
HW unit was disconnected or detached by operating system for some reason.
iii.
Any other reason which should be consulted with
.
2)
Select connection button: This button shows all connected devices, if “drop-down” list with
element IDs is not visible, that means that no devices has been detected which support GCon
protocol.
3)
Toggle connection button: Button toggles connection status ON/OFF. Please note that button
works only if ID has been previously selected using “Select connection button”.
4)
Connection details: Additional connection information:
a.
USB – module has been connected through direct USB connection in front panel.
b.
S#X – Slot number which is functionality available in _Titan frame, and means that internal
connection protocol between module and Frame is engaged.
5)
Connection ID: Unique Connection ID of connected HW unit.
6)
Fast setup change: Button switches between available setups A/B/C. Please note that this presets
won’t switch any connection related parameters. That means Connection ID is shared between all
available setups (A/B/C) and won’t be changed if any of those buttons is hit.
7)
Undo: Undo last parameter change (up to 20). Please note that setup change button (A/B/C) clears
current history.
8)
Redo: Redo last parameter change (up to 20). Please note that setup change button (A/B/C) clears
current history.
9)
Drive: Drive button activates saturation mode described in Chapter 3.
10)
Meter selection: Selects particular meter:
a.
GR - gain reduction,
b.
IN – input signal,
c.
OUT – output signal.
11)
Menu: New menu button added in release 4.0:
a.
Copy/Paste Preset – allows to copy fast presets between each other, or between different
plugin instances.
b.
Memory write – allows to write current plugin state to hardware internal memory (option
active only when global setting “Plugin and hardware memory sync” is disabled).
WesAudio _MIMAS plugin contains two types of plugins: Mono and
Stereo. Mono plugin is designed to work with a single HW unit. Stereo plugin
links one plugin with 2 hardware units, which allows to keep two devices
configured exactly the same way.