WESAUDIO
3/15/17
_MIMAS USER MANUAL REV4
10
5 VU/GR LED meter – It can display level of input and output signal as well as gain reduction level.
Switching between display modes is possible from DAW plugin.
6 Ratio - This buttons determines deepness of the compression and limiting. A ratio 4:1 is the
smaller possible value of compression, while 20:1 is larger value of limiting. 8:1 is the last button
when compression occur, after that, is only limiting. When all LEDs are active – all button mode
is engaged. Keeping ratio button for more than 1 second will also activate saturation mode
described in chapter 3.
7 Bypass – true bypass button
8 Link – activate link to other module
9
SC Filter/Link – this button determine three side-chain hi-pass filter frequency (60Hz, 90Hz, 150Hz).
10
A/B – two slot memory buttons which can be used to compare two different compressor settings
11 DATA LED – indicates that data is being sent from DAW to device
12 H-LINK LED – indicates state of host-module connection
13 USB – module control USB port
4.
Overview
Below picture shows a short overview of _MIMAS implementation.
