Rocktab U200 User Manual
133 / 151
Switching via programmable function keys
To switch between touchscreen modes using the programmable function keys, make sure the touchscreen
mode switching is set to the programmable function keys first.
1.
Start HotTab Utility
.
2.
Tap the Setting button.
3.
Tap the F1 icon.
4.
Tap the Long Press icon.
5.
Change the Long Press function to Touch Mode as shown
below:
When touchscreen mode switching is set to the programmable function key, long press the "F1" function
key to cycle through the different touchscreen modes. When the touchscreen mode is switched, an icon is
temporarily displayed in the lower center of the screen to indicate the current touchscreen mode:
