Supplement smartServo BL 4000
October 2022
Prevention of property damage
EN
smartServo BL 4000_Beiblatt_1446849_R1a_EN.docx
Parameterisation interfaces
Seite 3 von 4
1.4
Shielding BL 4100
1 Shielding plate (IEF-Werner)
3 Cable shield
2 Shielding terminal (SK14)
Figure 4
Shielding BL 4100
Always connect
the
shielding
before commissioning! If the shielding is not correct,
the EMC behaviour of the BL amplifier is more sensitive than with the servoTEC
amplifier. In addition, material damage to the USB port of the parameterisation PC is
possible.
2
Assignment Sub-D socket [X1] (I/O communication)
Wiring pin 11 with 24V (as with servoTEC-S2 FS) leads to irreparable damage to the
device (e. g. by test console for servoTEC)!
Top view
(BL 4100)
Top view
(BL 4300)
Figure 5
Pin assignment [X1]