WELD ON MOUNTING
* Welding procedure must be approved by an engineer or other
qualified person to be compatible with any and all structural &
operational characteristics of the selected installation location.
STEEL MOUNTING
Lock Nut
5/8 inch
Flat Washer
5/8 inch-11x4 inch
Hex Bolt *
Torque Range:
75 ft-lbs
(100Nm)
.25 inch
(6mm) min
drill 5/8 inch (16mm)Ø
* Use tapered washer with I-beams
that have tapered flanges.
3 inches(76mm)
min fr
om an
y edge
5/8 inch-11
* For steel applications, a grade-5, 8 (or equivalent) bolt no
shorter than 4 inches (100mm) with a locking nut and washer
must be used. Swivel anchor must be flush with steel surface.
A 16mm bolt may be used in place of a 5/8 inch-11 for metric
applications.
316 Stainless Steel
5/8 inch-11 x 1-3/4 inch Bolt
Torque Range:
75 to 90 ft-lbs
(100-120Nm)
3/8 inch min
(9.5mm)
* Weld
Internal Tooth Lock Washer
Page 5
MODELS: A570001 & A570003
MODELS: A570006
