WERKU WK400750, Оригинальное руководство пользователя

Страница: 3 / 48

English
ENG
ORIGINAL INSTRUCTIONS
3
alcohol or medicines. A moment of inattention while
operating power tools may cause damage serious
personal.
USE PPE’S.
Use protection glasses according EN166. Use
protection masks according EN149. If required by the
type of work, use other precise PPE.
DO NOT WORK ON TIPTOES.
Keep your feet on the ground and balance at all
times. This enables better control of the power tool in
unexpected situations.
DRESS PROPERLY.
Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose
clothes, jewelry or long hair can be caught in moving
parts. If there are devices for connecting means for
extracting and collecting dust, make sure they are
connected and properly used. The use of these
devices can reduce dust related hazards.
ELECTRICAL SAFETY.
The plug of the power tool must match with the base
of the socket. Never modify the plug in any way.
Do not use any adapter plug with earthed power
tools. Unmodified plugs and matching bases will
reduce the risk of electric shock. Avoid body contact
with grounded surfaces such as pipes, radiators,
cookers and refrigerators. There is an increased
risk of electric shock if your body is grounded. Do
not expose power tools to rain or wet conditions.
Water entering the power tool will increase the risk
of electric shock.
DO NOT ABUSE THE CORD.
Never use the cord to carry, lift or unplug the power
tool. Keep the cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock. When operating a power tool
outdoors, use an extension cord suitable for outdoor
use. The use of an extension cord suitable for outdoor
use reduces the risk of electric shock. If the use of a
power tool in a damp location is unavoidable, use a
power protected by a residual current device (RCD).
The use of an RCD reduces the risk of electric shock.
AVOID ACCIDENTAL STARTING.
Make sure the switch is in “off” position before
connecting to the network, or when taking or carrying
the power tool. Carrying power tools with your finger
on the switch or plugging in power tools that have the
switch in “on” position invites to accidents. Remove
keys or tools before starting the power tool. A left key
or tool attached to a rotating part of a power tool can
cause personal injury. Never lay this power tool down
until the accessory has come to a complete stop. The
spinning accessory may grab the surface and pull
this power tool out of your control. Do not run this
power tool while carrying it at your side. Accidental
contact with the spinning accessory could snag your
clothing, pulling the accessory into your body.
USE AND CARE OF POWER TOOLS.
Do not force the power tool. Use the correct power
tool for your application. The correct power tool
will do the job better and safer at the rate for which
it was conceived. Do not use the power tool if
the switch cannot be positioned to “off” and “on”
position. Any power tool that cannot be controlled
with the switch is dangerous and must be
repaired. Remove the plug from the power supply
and/or battery before making any adjustments,
changing accessories or storing the power tool.
Such preventive safety measures reduce the risk
of starting the power tool accidentally. Do not use
accessories which are not specifically designed
and recommended by Werku
®
. Just because the
accessory can be attached to this power tool, it
does not assure safe operation. The rated speed
of the accessory must be at least equal to the
maximum speed marked on this power tool.
Accessories running faster than their rated speed
can break and fly apart. The outside diameter and
the thickness of your accessory must be within
the capacity rating of this power tool. Incorrectly
sized accessories cannot be adequately guarded
or controlled. Threaded mounting of accessories
must match the spindle thread. For accessories
mounted by flanges, the arbour hole of the
accessory must fit the locating diameter of the
flange. Accessories that do not match the mounting
hardware of this power tool will run out of balance,
vibrate excessively and may cause loss of control.
Do not use a damaged accessory. Before each
use, inspect the accessory. If this power tool or
its accessory is dropped, inspect for damage or
install an undamaged accessory. After inspecting
and installing an accessory, position yourself and
bystanders away from the plane of the rotating
accessory and run this power tool at maximum no-