![background image](http://html1.mh-extra.com/html/wenshing/rd-710f/rd-710f_instruction-manual_956953004.webp)
http://www.wenshing.com.tw ; http://www.rf.net.tw
RD-710F Instruction Manual P.4
RD-710F Control Mode List
Remote Controller
Model No.
Dip Switch
,
Dial Code
Relay Mode
TX-FM04(B1B2)
4 ON
Roll-up door mode
2
,
4 ON
Lift Mode
1
,
4 ON
Automatically decrease mode
1
,
2
,
3 ON
Single point control
TX-FM04(OPEN,STOP)
4 ON
Roll-up door mode
2
,
4 ON
Lift Mode
1
,
4 ON
Automatically decrease mode
1
,
2
,
3 ON
Single point control
RD-710F Step
1. After you open box, please check whole accessories are complete.
(Host*1pcs, Remote controller *2pcs, Fix stand*1pcs, wire*1pcs)
2. Please check motor power supply to avoid danger.
3. Please put wire installed in the motor wiring plate according to the wiring
drawing on manual.
4. After fix the host on the wall, please connect the wire.
5. Motor voltage has
110V
and
220V
, please check voltage value on motor
and adjust the host power supply to the same voltage as motor power
supply.
6. Open motor power supply. If power function is normal, it is meaning you
finished assemble.
7. If it still has problem, please check following:
Wire connection is correct
Voltage is the same as motor
Dip code is the same.
8. If you still have problem on using, please contact disruptor.
WENSHING
Confidential
Do
Not
Distribution