Wenglor OY2TA104P0150E, Руководство по эксплуатации

Страница: 26 / 36

26
EN
7.9. Vendor-specific object (0x64)
7.9.1. Configuration assemblies
Configuration assembly (assembly instance ID 0x64)
Byte
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0
Filter
1
Reserved Display
rotate
Button
lock
Webser-
ver lock
Output
rate
Emitted
light
2
Display intensity
3 Display mode
4
Display language
5 Display text (string length)
6 Display text (char 1 of 19)
n
…
24 Display text (char 19 of 19)
25 Reserved1
1) The reserved byte at position 25 is required as padding. The length field of the connection path is word
based thus only allowing an even number of bytes for the configuration assembly.
7.9.2. Static input assembly
The input assembly (input from the point of view of the controller) contains the process data of the sensors.
Static input assembly (assembly instance ID 0x65)
Byte
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0
Measured value (bit 0-7)
1 Measured value (bit 8-15)
2 Measured value (bit 16-23)
3
Measured value (bit 24-31)
4 Status (bit 0-7)
5 Status (bit 8-15)