lMrXxxx
operatIng InStructIonS
P10/12
bInnIng InForMatIon
The LMRXxxx works in manual control and continuous
working (CW) mode by default. To use the remote
control, you need to connect the 8 pin cable and apply
PNP signals to the relevant pins. The LMRXxxx has Teach
and Run mode.
keypad control
Color and Sector Selection
• Program settings: push the 2 buttons together
for 3 - 4 seconds,
• Change settings: 1 push of Color and / or
Sector button(s) until desired configuration
is selected,
• Save settings: push the 2 buttons together
for 3 - 4 seconds.
Color selection
Sector
selection
Sector conFIguratIonS
1
2
4
3
1
2
4
3
1
2
4
3
1
2
4
3
a
B
C
wenglortpL is extremely careful about BIN sorting in the selection of LeDs for their products.
Specifically for the Cyan series on this product, the human eye is very sensitive to color variations. It may appear
to the customer that they do not appear the same between two cyan LED products. Despite any noticeable
differences, the peak wavelength variation does not exceed 10nm.
