23
Pressure sensors with temperature measurement and IO-Link
7. Settings
Parameters adjustable via the IO-Link interface:
Sensor Settings
Pressure unit of measure
bar/mbar (depending on the measured value)
PSI
kPa
MPa
Temperature unit of measure
Celsius
Fahrenheit
Switching output function
PNP
NPN
Push-pull
Analog output function
4…20 mA
0…10 V
Analog output scaling
Initial and final values between 0 and 100 % of the
measured value
Function, output 1
switching output Pressure
switching output Temperature
Function, output 2
switching output Pressure
switching output Temperature
Analog output Pressure
Analog output Temperature
Remote switching output
Remote analog output
Filter
0...10, 0 = filter off
Output Settings
Switching function
NO
NC
Switching point
Switching point 1
Switching point 2
Remote output
Open/closed
0...1000 (Analog value)
Sensor Restrictions
Write access disabling
Yes
No
Data storage disabling
Yes
No
Standard
Restore default settings
Process data available via IO-Link interface:
• Status of the switching outputs.
• Measured pressure in the selected U/M
• Measured temperature in the selected U/M
