8
•
Clean the Bass Drum/Gong Cart with a mild detergent and warm water. Avoid using harsh or
abrasive cleaning products.
•
Inspect tire pressure periodically as tires may lose air pressure when not used for long periods of
time.
•
Immediately replace any Caster wheels that do not rotate or turn freely.
•
Immediately replace or repair any tire that develops a flat area.
•
Recommended tire pressure is 50 psi. Do not exceed the maximum tire pressure shown on the
sidewall of the tire.
•
During heavy usage, periodically check and tighten the fasteners.
•
Grease zerks and bushings if required.
M
AINTENANCE
O
PERATION
To mount the bass drum onto the OnBoard Bass Drum/Gong Cart;
1. Attach the hook to one end of the bungee cord.
- Make a loop at the end of the bungee cord.
- Push the loop through the bottom of the hook
bringing it up in front of the hook.
(Detail G)
- Wrap the loop around to the back of the hook.
(Detail H)
- Pull tightly to secure the loop
The next steps require two people to complete.
2. With one person holding the bass drum, starting at the center
of the bottom tube loop, weave the bungee cord (end without hook)
through the bass drum and eye hooks on the cart.
3. Tighten the tension of the bungee cord as you go, keeping the bass drum centered on the cart.
4. At the bottom of the cart, with the bungee cord taunt and the bass drum centered, attached the
remaining hook to the end of the cord. Refer to step 1.
5. Secure the bass drum by hooking the two hooks together and tighten if necessary.
Note:
-
Bass drums vary in size, some variations may be required.
-
Extra hardware can be discarded.
Detail G
Detail H
!
CAUTION
