manualshive.com logo in svg

Wenger Diva, Руководство по установке, Страница: 1 / 36

Поделиться
Скачать
Wenger Diva Скачать руководство пользователя страница 1

Important User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Safety Precautions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Required Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Fasteners. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Ceiling Assembly Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Before Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Ceiling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Assemble the Truss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Mark the Stage Area  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Attach the Hanger Arms to the Batten   . . . . . . . . . . . . . . . . . 9

Attach the Hanger Arms to the Truss Assembly  . . . . . . . . . . 12

Assemble a Ceiling Row Panel . . . . . . . . . . . . . . . . . . . . . . . 14

Attach the Truss Assembly to the Ceiling Panel Row . . . . . . 16

Assemble the Bowstring to the Truss  . . . . . . . . . . . . . . . . . . 18

Apply Tension to the Bowstring . . . . . . . . . . . . . . . . . . . . . . . 20

Install the Ceiling Stays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Fly the Ceiling Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Level the Ceiling Assembly  . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Set the Ceiling Stay Performance Angle . . . . . . . . . . . . . . . . 25

Install the Ceiling Catch   . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Light Fixture Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Inspection   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Lieto LED Light Fixture Installation  . . . . . . . . . . . . . . . . . . . . 28

Lieto LED Light Fixture Electrical Connection. . . . . . . . . . . . 29

Light Fixture Configuration

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Initial Configuration

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Configure the DMXcat Connection

  . . . . . . . . . . . . . . . . . . . . 31

Lieto LED Light Fixture Communication  . . . . . . . . . . . . . . . . 31

DMX Address Information

  . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

LED Power Settings Chart   . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Light Fixture Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Adjustment and Aiming  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Photometrics  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Lieto LED Light Fixture Electrical Schematic  

(Diva Acoustical Ceiling)  . . . . . . . . . . . . . . . . . . . . . . . . 36

Decals, Numbers and Logos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Final Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Installation Instructions

Diva

®

 Acoustical Ceiling

©Wenger Corporation 2020 

Printed in USA 2020-05 

Part #185C756-05

Wenger Corporation,

 555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448

Questions? Call.....USA: (800) 4WENGER (493-6437) • Worldwide: +1-507-455-4100 • wengercorp.com

Contents

Note:

  Please read and understand these instructions before using or setting up.

Note:

  Review all of the Installation Drawings and Reference Drawings.

Note:

  It is recommended that three or more people work together during the assembly.

Note:

  If you need additional information, contact Wenger Corporation using the information below.

Visit the Diva Acoustical Shell web page at wengercorp.com for more information.

Содержание Diva





































Отзывы:

Нет отзывов