Wenger 145V006, Руководство по сборке, Страница: 4 / 8

4
1. Check the level of the
entire floor where the
cabinets will be
installed. Determine
the highest point of
the floor in that area.
Extend all levelers
until the bottom of the
cabinet will be higher
than the highest point
in the floor.
2. Adjust the levelers on
one side until the front
edges of the cabinet
side panels are plumb
(side-to-side).
3. Measure A and B with a tape
and adjust the front levelers
until A=B (+
1
/
32
inch).
4. Adjust both front levelers
equally until the front
edges of the cabinet are
plumb (front-to-back).
5. Recheck that A=B.
Readjust if necessary
(repeat steps 2-4).
If additional cabinets will be installed:
6. Adjust the levelers on the next cabinet so it
will line up with the top of the first cabinet.
7. Repeat steps 2-5 for the second cabinet.
8. Continue in the same manner until all cabinets
are leveled.
L
EVELING THE
C
ABINETS
NOTE: Do not try to level the cabinets to match soffits.
NOTE: Do not try to plumb the cabinet to match adjacent walls.
NOTE: For proper door alignment, follow these instructions carefully.
NOTE: To access the levelers, the file drawers must be removed first.
See “File Drawer Removal” before leveling the cabinet.