7
ASSEMBLY
WARNING:
Do not attempt to assemble or operate this pressure washer
until you have read and understood this entire manual. If you have any
problems assembling or operating this unit, please call (800) 232-1195 M-F
8-5 CST for customer service.
WARNING:
Do not operate this pressure washer if any of the parts are
damaged or missing until the part is replaced. Using this product with dam-
aged or missing parts can cause damage to the machine or result in serious
injury or death.
INSTALLING THE HANDLE AND HOLDERS TO THE
PRESSURE WASHER
Install the handle into the upper portion of the pressure washer. Hold it in
place using three screws - one through the front and two in the back (Fig. A).
Attach the hose wrangler into the middle of the top hook. Hold it in place
with four screws through the back of the handle (Fig. B).
Once the upper handle has been installed, attach the extension cord hook
(Fig. C), the upper gun holster (Fig. D) and the lower gun holster (Fig. E) into
each of their respective locations by snapping them into place.
Attach the lance of the spray gun to the handle by lining up the indentations
on the end of either item (Fig. F). Slide the lance into place and twist to lock it.
The spring loaded center requires that you push in and twist when attempting
to install and remove the lance from the handle.
Attach the water inlet adapter to the water inlet. This will allow for your gar-
den hose to attach to the pressure washer.
Finally, attach one end of the high pressure hose to the spray gun and the
other to the pressure washer.
Fig. A
Fig. B
Fig. C
Fig. D
Fig. E
Содержание PW20
Страница 13: ...13 EXPLODED VIEW PARTS LIST ...