![background image](http://html1.mh-extra.com/html/wen/pw19/pw19_manual_956469011.webp)
11
SHUTTING DOWN THE UNIT
When the pressure washing task has been completed, follow the steps below to shut down the unit.
1. Turn off the ON/OFF switch and unplug the power plug from the outlet.
2. Turn off the water supply.
3. Pull the high pressure gun trigger to relieve all the built-up pressure in the machine.
4. Release the trigger and engage the gun safety lock.
NOTE:
To maximize safety, always engage the safety lock when the gun is not in use.
5. Disconnect the garden hose from the water inlet on the back of the unit.
6. Disconnect the high pressure hose from the pressure washer outlet.
7. Follow the instructions on the next page for properly maintaining and storing your pressure washer.
OPERATION
THERMAL PROTECTOR
Your pressure washer is also equipped with a motor thermal protector. When the motor is experiencing overload
and over heats, the thermal protector will trip to shut down and protect the motor. Wait a few minutes for the mo-
tor to cool down and the thermal protector will reset automatically.
PRESSURE WASHING TIPS
1. Before pressure washing any surface, test spray an inconspicuous area. Adjust the spray pattern and spraying
distance to achieve the optimal cleaning result and prevent damaging the surface.
2. Use caution when spraying clipped or peeling paint, as the high pressure may remove the loose paint from the
surface.
3. Pre-rinse the surface with fresh water before applying detergent.
4. When using detergent, follow the instructions that come with your detergent. In general, allow the detergent to
remain on the surface about 1-3 minutes. Do not allow detergent to dry on the surface.
5. Keep the spray nozzle approximately 6 inches from the cleaning surface. The spraying distance may vary ac-
cording to the treated surface (be sure to increase the distance when rinsing sensitive or fragile surfaces). Rinse the
surface in a long sweeping motion.
6. Clean from top to bottom. When moving on to a new section of the cleaning surface, overlap the previous sec-
tion to eliminate stop marks and ensure a more even cleaning result.
7. When pressure washing surfaces that may come in contact with food, flush surfaces with plenty of drinking
water after pressure washing. However, WEN does not recommend eating off of your driveway.
Содержание PW19
Страница 14: ...14 EXPLODED VIEW PARTS LIST...