Wen PL1303, Инструкция по эксплуатации

Страница: 3 / 24

SPECIFICATIONS
INTRODUCTION
Thanks for purchasing the WEN Benchtop Planer. We know you are excited to put your tool to work, but first, please
take a moment to read through the manual. Safe operation of this tool requires that you read and understand this
operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety
concerns, as well as helpful assembly and operating instructions for your tool.
NOTE: The following safety information is not meant to cover all possible conditions and situations that may occur.
WEN reserves the right to change this product and specifications at any time without prior notice.
At WEN, we are continuously improving our products. If you find that your tool does not exactly match this manual,
please visit wenproducts.com for the most up-to-date manual or contact our customer service at 1-800-232-1195 .
Keep this manual available to all users during the entire life of the tool and review it frequently to maximize
safety for both yourself and others.
Indicates danger, warning, or caution. The safety symbols and the explanations with them deserve your
careful attention and understanding. Always follow the safety precautions to reduce the risk of fire, electric shock
or personal injury. However, please note that these instructions and warnings are not substitutes for proper ac-
cident prevention measures.
3
Model Number PL1303
Motor 120V, 60 Hz, 15A
Cutterhead Speed (No-Load) 10,000 RPM
Number of Blades 3 Blades
Cuts Per Minute 30,000
Feed Rate 26 FPM
Maximum Depth of Cut
1/8 Inch (for material < 6 inches wide)
1/16 Inch (for material > 6 inches wide)
Maximum Workpiece Width
13 Inches
Maximum Workpiece Thickness 6 Inches
Dust Chute Adapter Sizes 2-1/2, 4 Inches
Product Dimensions 24 in. x 28-1/4 in. x 20 in.
Product Weight 63.0 lbs