6
1. Push the locking/unlocking button (Fig. 1 - 1) to
deploy all four legs and lock them into place.
2. Insert each extension arm into the main frame of
the crossbars (Fig. 2).
3. Insert the locking knob into the mainframe cross-
bars to secure the extension arms (Fig. 3).
4. Slide the work support brackets onto the exten-
sion arms (Fig. 4).
5. Secure the work support brackets in place using
the locking knobs (Fig. 5).
6. Insert the work support rollers into the brackets
(Fig. 6) and lock them in place using the locking
knobs (Fig. 7).
For Normal Cutting Operations:
The top of the rollers should be level with the sur-
face of the miter saw’s table. This will ensure a level
support for your workpiece.
Slide the extension arms to a suitable distance in
order to provide maximum support for your work-
piece.
For Repetitive Cutting Operations:
The support roller can also be used as a stop face
for repetitive cutting operations. Orient the roller so
the stop face (Fig. 8 - 1) faces the miter saw. Adjust
the height of the roller so that the stop face is level
with the surface of the miter saw’s table.
Adjust the relevant extension arm until the stop face
is at the required stopping distance.
ASSEMBLY & ADJUSTMENTS
1
1
Remove all loose parts from the carton. If you find
any pieces that are missing or incorrect, do not op-
erate the tool until the parts have been replaced.
Failure to do so could result in serious personal
injury.
Fig. 1
Fig. 4
Fig. 6
Fig. 3
Fig. 5
Fig. 7
Fig. 8
Fig. 2
Содержание MSA750
Страница 10: ...THANKS FOR REMEMBERING...