Wen MSA330, Инструкция по эксплуатации

Страница: 12 / 16

MOUNTING UNUSUAL MITER SAWS
If your miter saw is strange or unusual in terms of either its mounting holes or its social skills, don’t be alarmed.
Every miter saw is special in its own unique way. If you have one of these special miter saws, an adaptor plate may
be necessary. The adaptor should be a square or rectangular worktop (such as a piece of plywood) that fits the
footprint and mounting hole configuration of your miter saw. We recommend using a piece of plywood at least one
inch thick.
1. Bolt the adaptor plate securely to the two saw mounting brackets.
2. Attach the adaptor plate onto the miter saw stand using the saw mounting brackets and lock it in place.
3. Position the miter saw above the adaptor plate. Ensure that the bulk and weight of the miter saw is centrally
located over the two crossbars. The saw fence should align as closely as possible with the center line of the miter
saw stand’s rear crossbar. Bolt the miter saw securely to the adaptor plate with appropriate screws and fixings.
4. Check the stability of the machine and installation before operation.
NOTE: Consult the manufacturer of the saw for any special adjustments, requirements or fixings needed to perma-
nently mount your saw to a worktop. Take precaution over a full range of operating conditions. Don’t be judgmental
towards your saw for being different than the other saws on the market. You will hurt its feelings.
OPERATION
1. Before each use, inspect the general condition of the miter saw stand and power tool. Check for:
• Loose hardware,
• Misalignment or binding of moving parts,
• Damaged cord/electrical wiring,
• Cracked or broken parts, and
• Any other condition that may affect its safe operation.
2. After every use, wipe the external surfaces with a clean cloth. Do not let water enter the power outlet or electrical
system on the miter saw stand.
3. Store the tool indoors in a safe, dry area away from children. Inspect the tool for good working condition prior to
storage and before re-use.
PRODUCT DISPOSAL
The tool, accessories and packaging should be sorted for recycling instead of disposed of with household waste.
Please take them to your local recycling facility for responsible disposal and to minimize the environmental impact.
MAINTENANCE
Please recycle the packaging and electronic components where facilities exist. Please contact your
local auto garage or recycling facility to properly dispose of oil/fuel.
12