Wen LA3424 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 24

Wen LA3424 Скачать руководство пользователя страница 14

TURNING TOOLS

If possible, select only quality high-speed steel turning tools. High-speed steel tools hold an edge and last longer

than ordinary carbon steel. As one becomes proficient in turning, a variety of specialty tools for specific applications

can be acquired. The following tools provide the basics for most wood-turning projects. Sharp tools must be used;

do not use dull or damaged tools.

1. Large roughing gouge - use this tool to shape

square or out-of-round spindle-turning stock into

a cylinder. This can also be used for creating shal-

low coves.

2. Skew chisel - the skew evens out high and low

spots to shape the cylinders. Vary angle at which

the tip meets the workpiece to change the aggres-

siveness of the cut. This can also be used for cut-

ting beads and V-grooves.

5. Bowl gouge - the bowl gouge cuts external and

internal profiles on faceplate-mounted stock, such

as bowls and platters. It can also be used for cre-

ating ultra smooth cuts on bowls and spindles by

using it as a shearing scraper.

6. Round nose scraper - use this scraper for non-

agressive shaping of spindles and bowls and to

smooth out surfaces without removing too much

stock.

45° bevel

75-90°

bevel

60-80° bevel

Shaping &

Hollowing Bowls

3. Spindle gouge - the spindle gouge cuts coves,

beads and free-form contours. It can also be used

for producing shallow hollows on faceplate turn-

ings.

4. Parting tool - use the parting tool to form grooves

and tenons and to remove stock. It can also be used

for rolling small beads.

30-40° bevel

30-45°

bevel

Cove

Bead

Groove

Tenon

Smoothing

Bowls

Turning rough stock

round

~70° skew

Planing and Smoothing

OPERATION

14

«
...
12
13
14
15
16
...
»

Содержание LA3424

























Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды