Wen JN8504, Инструкция по эксплуатации

Страница: 15 / 20

15
MAINTENANCE
CLEANING
• Keep the biscuit joiner clean of any wood chips, dust, dirt or debris.
• Ventilation openings and switch levers must be kept clean and free of foreign matter.
• The tool may be cleaned most effectively with compressed dry air.
• Always wear safety goggles when cleaning tools with compressed air.
• Do not attempt to clean these components by inserting pointed objects through openings.
WARNING! To prevent serious injury from accidental operation, make sure that the biscuit joiner is turned
off and unplugged from power source before installation, cleaning, and maintenance operations.
WARNING! Preventive maintenance performed by unauthorized personnel may result in misplacing of inter-
nal wires and components, possibly causing a serious hazard.
WARNING! Certain cleaning agents and solvents damage plastic parts. This includes but is not limited to
gasoline, carbon tetrachloride, chlorinated cleaning solvents, ammonia and household detergents that contain
ammonia.
CARBON BRUSHES
To maintain maximum efficiency of the motor, we recommend chang-
ing the carbon brushes every 60 hours of operation. Replacement car-
bon brushes (Model JN8504-035) are available at wenproducts.com.
Only genuine WEN replacement brushes designed specifically for your
tool should be used. To inspect or replace the carbon brushes:
1. Unscrew the screw securing the brush cover (Fig. 15-1) and remove
the brush cover.
2. Use a small screwdriver (not included) or other small instrument
to release the coil spring from the carbon brush and remove the worn
carbon brush.
3. Replace the carbon brush, securing it with the coil spring. Reinstall
the brush cover.
Fig. 15
1
Carbon
Brush