![background image](http://html1.mh-extra.com/html/wen/jn8504/jn8504_instruction-manual_956220013.webp)
13
OPERATION
MAKING A BISCUIT SLOT
1. Ensure the workpiece is secure and clamped down.
2. Adjust cutting depth, fence angle, and height of cut (see pages 11
and 12).
3. Plug the biscuit Joiner into a proper outlet.
4. Align the cutting guides on the fence and slide plate with the marks
on the workpiece (Fig. 10).
NOTE:
It is recommended to mark the center of the desired biscuit slot
on a face that will be visible during the cutting operation. Align this
center mark with the center indent on the slide plate.
5. Turn on the biscuit joiner. Make sure the blade reaches full speed
before making any cuts
Fig. 10
Cutting
Guide
NOTE:
This biscuit Joiner is equipped with a safety trigger. First press the trigger lock and then the trigger in order
to turn the tool ON. The trigger needs to stay depressed to stay ON. Simply release the trigger to turn the unit OFF.
6. Press biscuit joiner into the workpiece to make the biscuit slot cut.
7. Once the blade is completely plunged into the workpiece, ease pressure on the biscuit joiner to allow the blade to
retract out of the workpiece and back into the slide plate.
8. Once finished cutting, unplug the tool from the power source and store unit in blow molded case. Empty dust bag
frequently to maintain efficiency and quality.
OPERATION TIPS
It is recommended to test cutting of biscuit slots on scrap wood before making any final cuts. This will help properly
align the slot and the biscuit in the final workpiece.
The biscuit joiner is set up to cut the standard 3 different sizes of biscuits. It is recommended to use the largest
biscuit size that will fit the joint.
See Figure 11
for the standard sizes of biscuits.
2.2 in. (56mm)
1 in.
(23mm)
#20
2.1 in. (53mm)
#10
0.75 in.
(19mm)
#0
0.60 in.
(15mm)
1.9 in. (47mm)
Fig. 11
Содержание JN8504
Страница 17: ...17 EXPLODED VIEW PARTS LIST...
Страница 20: ...THANKS FOR REMEMBERING V 2020 03 24...