MAINTENANCE
ROUTINE INSPECTION
Before each use, inspect the general condition of the tool. If any of these following conditions exist, do not
use until parts are replaced or the sharpener is properly repaired.
Check for:
• Loose hardware,
• Damaged cord/electrical wiring,
• Cracked or broken parts, and
• Any other condition that may affect its safe operation
CLEANING & STORAGE
1. Keep the ventilation openings free from dust and debris to prevent the motor from overheating.
2. Wipe the tool surfaces clean with a damp cloth and mild soap. Make sure water does not get into the
tool.
WARNING:
Any attempt to repair or replace electrical parts on this tool may be hazardous. Ser-
vicing of the tool must be performed by a qualified technician. When servicing, use only identical
WEN replacement parts. Use of other parts may be hazardous or induce product failure.
CAUTION
:
Most plastics are susceptible to damage from various types of commercial solvents. Do not
use any solvents or cleaning products that could damage the plastic parts. Some of these include but
are not limited to: gasoline, carbon tetrachloride, chlorinated cleaning solvents, and household deter-
gents that contain ammonia.
WARNING:
To avoid accidents, turn OFF and unplug the tool from the electrical outlet before
cleaning, adjusting, or performing any maintenance work.
PRODUCT DISPOSAL
Used power tools should not be disposed of together with household waste. This product contains elec-
tronic components that should be recycled. Please take this product to your local recycling facility for
responsible disposal and to minimize its environmental impact.
4. Allow the tool to cool before storing it. Store the tool in a clean and dry place away from the reach of
children.
11