9
ASSEMBLY & ADJUSTMENTS
ATTACH THE FABRIC TOOL POUCH HOLDER
1. Flip the garage glider upright, so its sitting on its wheels.
2. Align the holes on the tool pouch holder (Fig. 4 - 1) with the
holes on the rear of the tool chest.
3. Fasten with two M6 bolts. Use a Phillips-head screwdriver
(not included) to tighten.
4. Fold the top of the pouch (Fig. 5 - 1) into the slot behind the
tool pouch holder (Fig. 4 - 1).
5. Snap all four snaps on the pouch together to secure it on the
tool pouch holder.
SIDE TRAY STRAPS
There are two pre-assembled tool tray straps (Fig. 6 - 1) located
on the short sides of the garage glider. These straps can be used
to fold up the tool trays when not in use.
To fold up:
1. Remove all items from the tool tray. Fold the tool tray up.
2. Snap the tool tray strap onto the bottom of the tool tray.
To unfold:
1. Hold the tool tray, unsnap the tool tray strap. Slowly lower
the tray.
2. Place tools onto the tool tray, do not exceed 11 pounds evenly
distributed.
Fig. 4
1
1
Fig. 6
Fig. 5
1
Содержание GG7315
Страница 12: ...THANKS FOR REMEMBERING V 2020 06 30 ...