Wen BG9910, Руководство пользователя

Страница: 17 / 24

MAINTENANCE
WATER RESERVOIR
Periodically empty out the water reservoir. Rinse it of any metal filaments and refill it with clean water to
prevent buildup on the wheel itself. Your cleaning schedule should depend on frequency of use.
Adjust the water reservoir mounting height to make sure water levels are always sufficient to keep the wheel
wet during grinding operations.
WARNING:
To avoid accidents, turn OFF and unplug the tool from the electrical outlet before clean-
ing, adjusting, or performing any maintenance or lubrication work. Servicing of the tool must be per-
formed by a qualified technician.
ROUTINE INSPECTION
Before each use, inspect the general condition of the tool. If any of these following conditions exist, do not
use until parts are replaced or the sharpener is properly repaired.
Check for:
• Loose hardware or improper mounting (screws might come loose from vibration during operation),
• Misalignment or binding of moving parts,
• Damaged cord/electrical wiring,
• Cracked or broken parts, and
• Any other condition that may affect its safe operation
CLEANING
After every operation, wipe the tool surfaces clean with a soft cloth or brush. Make sure water does not get
into the tool. Use a vacuum or low-pressure compressed air to remove dust and debris from the tool surfaces,
motor housing and work area. Keep the ventilation openings free from dust to prevent the motor from over-
heating.
CAUTION
:
Most plastics are susceptible to damage from various types of commercial solvents. Do not
use any solvents or cleaning products that could damage the plastic parts. Some of these include but
are not limited to: gasoline, carbon tetrachloride, chlorinated cleaning solvents, and household deter-
gents that contain ammonia.
17