Wen BG9910, Руководство пользователя

Страница: 12 / 24

ASSEMBLY & ADJUSTMENTS
SETTING UP THE SQUARE EDGE JIG
The square edge jig included with your sharpener is
designed to assist in sharpening chisels and planer
blades.
1. To install the square edge jig, slide the square
edge jig onto the work support arm (Fig. 4).
2. Loosen the locking knobs and place the blade in
the jig so that one edge of the blade is positioned
against the end stop (Fig. 5 - 1).
3. Tighten the lock knobs to secure the blade into
position.
4. Follow the instructions on the next page for set-
ting the sharpening angle of the blade using the
angle guide.
USING THE WORK SUPPORT ARM AS
A WORK REST
If the workpiece is too large to be mounted into the
jig, you can rest it directly onto the support arm.
This will help you balance the weight of the work-
piece and keep it steady.
OTHER SHARPENING JIGS
To sharpen knives, scissors and axes, you’ll need
the
WEN 42704A 4-Piece Sharpening Accessory
Kit (Fig. 6), sold separately at wenproducts.com.
This kit includes a short knife jig, a long knife jig, a
scissors jig, and an axe jig. Follow the instructions
included with your accessory jig for assembly and
operation.
Fig. 4
Fig. 5
Fig. 6
WEN 42704A 4-Piece Sharpening Accessory Kit
1
WARNING:
To prevent accidental starting, make sure the machine is switched OFF and the power
plug is disconnected before assembly, setting up or making adjustments.
12