Wen BA1411 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 32

Wen BA1411 Скачать руководство пользователя страница 19

REMOVING & REPLACING THE BLADE

Removing the blade:

1. Make sure that the tool is OFF and disconnected from the power source.

2. Push the blade tension quick release lever to the UP position to release the tension on the blade.

3. Move the blade guard all the way up by loosening the blade guide locking knob.

4. Remove the fence, miter gauge, table insert, and table pin from the table.

5. Open the upper and lower wheel covers.

6. Only handle the blade when wearing protective gloves. Carefully remove the blade from the wheels, rotate the

blade 90º, and slip it out from the table through the table slot.

Replacing the blade:

1. Make sure that the tool is OFF and disconnected from the power source.

2. Only handle the blade when wearing protective gloves. Position the blade so that the teeth are pointing right and

down toward the table. Rotate the blade 90º and place it over the wheels while making sure that it's fitted between

the blade guides.

3. Use the blade tension adjustment knob to tension the blade. See "SAW BLADE TENSION & TRACKING". Pull the

blade tension quick release lever DOWN to lock the tension.

4. Check and adjust the blade tracking. See "SAW BLADE TENSION & TRACKING".

5. Check and adjust blade guide bearings. See "BLADE GUIDE BEARING ADJUSTMENT".

6. Close the wheel covers, replace the table pin, insert, miter gauge, and fence.

ASSEMBLY & ADJUSTMENTS

WARNING!

The blade is extremely sharp. Only handle the blade when wearing protective gloves.

19

«
...
17
18
19
20
21
...
»

Содержание BA1411

































Отзывы:

Нет отзывов