ASSEMBLY AND ADJUSTMENTS
SWITCH LOCK
The hole on the trigger (Fig. 1) is a safety feature that enables the
switch to be locked off. To lock off the switch, insert a padlock
through the hole and lock the padlock. This will prevent the switch
from being pressed down and reduce the risk of children acciden-
tally starting the machine.
BENCH MOUNTING
1. The miter saw base has holes in the four corners to facilitate
bench mounting (Fig. 2 - 1). Mount and fix the saw to a level, hori-
zontal bench or worktable using four bolts and nuts (not included).
2. If desired, you can mount the saw to a piece of 1/2˝ or thicker
plywood which can then be clamped to your work bench or moved
to other job sites and reclamped.
CAUTION:
Make sure that the mounting surface is not warped.
Uneven surfaces can cause binding and inaccurate sawing.
A
A
B
B
C
C
D
D
E
E
F
F
G
G
H
H
12
12
11
11
10
10
9
9
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
DRAWN
CHK'D
APPV'D
MFG
Q.A
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS
SURFACE FINISH:
TOLERANCES:
LINEAR:
ANGULAR:
FINISH:
DEBURR AND
BREAK SHARP
EDGES
NAME
SIGNATURE
DATE
MATERIAL:
DO NOT SCALE DRAWING
REVISION
TITLE:
DWG NO.
SCALE:1:10
SHEET 1 OF 1
A2
WEIGHT:
70730 3D FIle1
SETTING THE FENCE SQUARE WITH THE BLADE
Note: The set square is not included.
1. Lower the saw arm down to the lower position and lock the
release knob.
2. Slide the saw arm to the back and tighten the slide lock knob.
3. Set the miter table to 0° and tighten the miter lock.
4. Loosen the four screws on the back of the fence (Fig. 2 - 2) with
an allen wrench.
5. Place a set square against the fence and alongside the saw blade
(Fig. 3). Adjust the fence position until it is 90° with the blade.
6. Tighten the four screws to secure the fence.
SETTING THE MITER SCALE POINTER
1. Loosen the screw holding the miter scale pointer (Fig. 4 - 1).
2. Adjust the direction of the pointer so that it accurately indicates
0° on the miter scale.
3. Tighten the screw on the pointer.
Fig. 2
14
Fig. 3
1
2
1
Fig. 4
WARNING:
Remove the power plug before performing adjustments on the miter saw. Wear work
gloves when handling saw blades to protect your hands from possible injuries.
Fig. 1
Содержание 70730
Страница 23: ...EXPLODED VIEW PARTS LIST 23 ...
Страница 27: ...THANKS FOR REMEMBERING ...