Wen 65910, Руководство пользователя

Страница: 11 / 32

ASSEMBLY
1. Attach the 2 wheel brackets to the 2 wheel-
mounting legs with (4) M8-1.25 x 16 hex bolts
and (4) M8-1.25 lock nuts. Note that the left and
right wheel brackets are different configurations.
Tighten the fasteners with a wrench.
2. Slide the wheel axle through the 2 wheel
brackets. Then install the two wheels onto the
two ends of the wheel axle.
3. Secure the 2 wheels with the 2 cotter pins by
inserting them through the axle holes and bend-
ing back the ends.
STEP 2: INSTALLING THE WHEELS (Fig. 2)
STEP 3: INSTALLING THE HANDLES (Fig. 3)
1. Attach the lifting handle assemblies onto the handle-mount-
ing with (4) M6-1 x 10 flat head screws and (4) M6-1 lock
nuts.
2. Use a Phillips screwdriver to hold the mounting screws
stationary while tightening the locking nuts with a suitable
wrench.
NOTE:
The handle should be able to swing up 90 degrees
from the “down” position, but not any farther
Wheel Brackets (x2)
Lifting Handle
Assemblies (x2)
Wheel Axle (x1) Wheels (x2)
M8-1.25 x 16
Hex Bolts (x4) M8-1.25
Lock Nuts (x4)
M6-1 x 10
Flat Head Screws (x4) M6-1
Lock Nuts (x4)
Cotter Pins
4 x 20mm (x2)
Fig. 2
Fig. 3
11