Wen 49103, Руководство пользователя

Страница: 11 / 14

This tool is permanently lubricated at the factory and requires no additional lubrication. There are no user ser-
viceable parts in your power tool. Do not try to open or disassemble your screwdriver or replace the battery cell.
WARNING:
To avoid serious personal injury, always unplug the charger from the power source and
from the tool when cleaning or performing any maintenance.
WARNING:
When servicing, use only identical replacement parts. Use of any other parts may create a
hazard or cause product damage. To ensure safety and reliability, all repairs should be performed by a
qualified service technician at an Authorized Service Center.
CLEANING THE TOOL
Never use water or chemical cleaners to clean your power tool. Most plastics are susceptible to damage from
various types of commercial solvents. Wipe the tool clean with a dry cloth. Keep the motor ventilation slots clean.
Keep all working controls free of dust.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils,
etc. come in contact with the plastic parts. Chemicals can damage, weaken or destroy plastic which may
result in serious personal injury.
STORING THE TOOL
Always store your power tool in a dry place. To protect the batteries from damage, do not expose the tool to tem-
peratures above 104°F (40°C).
DISPOSAL
When the product reaches the end of its lifetime, please do not dispose of it with household waste. Electrical and
electronic products are hazardous to the environment and human health due to the presence of hazardous sub-
stances. Take the product to your local recycling facility for it to be responsibly recycled to minimize impacts on
the environment.
OPERATION
MAINTENANCE
1
Fig. 7
LED WORKING LIGHT
The LED work lights (Fig. 7 - 1) are located on the front of the screw-
driver, allowing workpieces to stay illuminated when the screwdriver is
running.
11