ASSEMBLY AND ADJUSTMENTS
16
WARNING:
Do not turn on the tool until it is fully assembled according to the instructions.
Failure to follow the safety instructions may result in serious personal injury.
WARNING:
When handling saw chains, always wear protective gloves to prevent injury.
SAW CHAIN LUBRICATION
Always remove the battery from the unit before inspection and adjustment work.
Never operate the pole saw without saw chain oil. The use of the pole saw without enough saw chain
oil will damage the unit.
Only use special saw chain oil. Other oils will run the risk of damaging the unit and voiding the war-
ranty.
Take note of temperature conditions. Using the saw at various temperatures requires the use of dif-
fering oils. To ensure a sufficient layer of lubricant at lower temperatures, use liquid oil (low viscos-
ity).
ADJUSTING THE TELESCOPING HANDLE
1. Unlock the telescope release lever (Fig. 6 - 1)
so that the pole can freely extend outwards and
inwards.
2. Extend it to the desired length and lock the
telescope release lever to hold it in place.
Fig. 6
1