KNOW YOUR ROTARY TOOL
Carefully unpack the tool from the packaging. Check all components and compare against the graph below. If
any part is damaged or missing, please contact our customer service at (800) 232-1195, M-F 8-5 CST or email
us at [email protected].
Carbon Brush Cover (one on each side)
Spindle Lock Button
Collet Nut
Rotational Direction
Variable Speed Dial
ON/OFF Switch
Hanger
Ventilation Slots
Locking
Collar
ROTARY TOOL SAFETY RULES
(Continued)
TURNING ON THE TOOL
Before turning on the rotary tool, ensure that it is completely clear of the workpiece. Let the tool reach full
speed before making contact with the workpiece.
DURING OPERATION
• Do not apply excessive pressure to the tool or attempt to make an excessive depth of cut. Overstressing the
tool may cause kickback and damage the tool and accessories.
• Use special care when working corners, sharp edges etc. Avoid bouncing and snagging the accessory.
• Never touch any moving parts of the tool by hand.
• Never press in the spindle lock button when the rotary tool is running.
TURNING OFF THE TOOL.
Clear the tool from the workpiece before switching off the tool. Wait for the rotary bit to come to a complete
stop before setting the tool down.
MAKING ADJUSTMENTS
• Always turn off the machine and disconnect from the power source before making adjustments or changing
attachments. Do not remove the attachment from the tool until it has completely stopped rotating.
• Do not touch the accessory attachment immediately after operation, as it may be very hot. Allow time for
the accessory to cool and calm down before removing it.
8
Содержание 23114
Страница 18: ...THANKS FOR REMEMBERING ...