Wen 23103, Руководство пользователя

Страница: 9 / 16

KNOW YOUR ROTARY TOOL
Accessory Explanation & Applications
1. Collet
For holding a rotary bit in place. Your tool comes with 1/8-inch and 3/32-inch col-
lets. Use the correct size collet that matches the shank diameter of your rotary bit.
2. Wrench
The front of the wrench is for loosening the collet nut to change collets. The back of
the wrench is for opening the carbon brush covers and adjusting the screws on the
sanding drum and small screw mandrel.
3. Dressing Stone
A solid block made of hard abrasive. Breathes new life back into old or worn grind-
ing stone bits.
4. Screw Mandrel
A mandrel with a screw head for attaching felt polishing accessories. Screw the pol-
ishing wheel attachment all the way onto the top of the mandrel (see page 10).
5. Felt Polishing Wheel
Perfect for finishing a workpiece’s surface. Cleans, polishes and buffs metal, wood,
and plastic. For best results, polishing accessories should be used at speeds below
15,000 RPM. Attach to the screw mandrel
(see page 10) .
6. Small Screw Mandrel A mandrel with a threaded head and screw top for attaching cut-off wheels and sand-
ing discs. See page 10 for attaching cut-off wheels and sanding discs.
7. Cut-Off Wheel
Thin disc for slicing and cutting. These discs create fast cuts used ideally in mainte-
nance repair and general industrial applications. Attach to the small screw mandrel
(see page 10) .
8. Sanding Disc
Disc-shaped sandpaper used for material removal and resurfacing. Attach to the
small screw mandrel (see page 10).
9. Sander Band
Slides over the top of the drum sander to remove rust, shape rubber, and smooth
surfaces. Attach to the drum sander (see page 10) .
10. Sanding Drum A mandrel with a cylinder-shaped rubber tip for attaching sanding bands.
11. Drill Bit Cutting tool used to drill into materials such as metal, hardwood, and plastics.
12. Diamond Bit
Creates efficient cuts for engraving in wood, plastics, and soft metals such as alumi-
num, copper, and brass.
13. Grinding Stone Bit
Composed of an abrasive compound and used for various grinding and abrasive
machining operations. Great for removing flash from metal castings, deburring metal
after cutting, smoothing welded joints, grinding off rivets and removing rust. Can be
resharpened with a dressing stone.
Refer to the chart below for explanations and recommended applications for your rotary tool accessory bits.
9