WELTECH BW-2050, Руководство пользователя

Страница: 2 / 11

CALIBRATION
The BW ‐ 2050 is calibrated by Weltech before it leaves the factory.
Should you need to calibrate the weigher or set a fi xed tare weight if
using a shackle then follow the instruc ons below.
TO CALIBRATE THE WEIGHER
Have the weigher switched o ff with no shackle on. Hold down the CAL
key and turn on the weigher. When WELTECH SETUP is displayed
release the CAL key. The display will show CALIBRATION with 5.000 KGS
fl ashing below. You can adjust the calibra on weight up and down using
the INC and DEC keys to set the calibra on weight to the exact weight of
your calibra on weight. Press the ENTER key once the weight is set. The
display will show CALIBRATE NOW? [SETUP]=YES . Press the SETUP key
and the display will fl ash up CALIBRATING ZERO and then the display
will show PLACE THE WEIGHT . Hang on your calibra on weight and the
display will show CALIBRATION SCALING and then SAVING NEW
SETTINGS . You can then check the calibra on by weighing your
calibra on weight.
TO TARE THE SHACKLE
Make sure the display shows 0.000 KGS if not press TARE . Power o ff the
weigher and a ach the shackle. Power on the weigher and press the
TARE key. The weigher will tare out the shackle weight and show
0.000 KGS. This tared weight will stay in the weigher un l another tare is
done.
SETUP OPTIONS
To reset the weigher back to Factory se ngs hold the MEMORY STORE
bu on and turn on. The display will show WELTECH SET UP un l the
bu on is released, when the bu on is released FACTORY RESET will be
displayed, press ENTER to change se ngs. The display will show
DISPLAY STYLE , it can be set to metric or USA by pressing the INC
arrow, when set press ENTER , The display will show WEIGHT RANGE
and CHICKEN will fl ash, push ENTER . The display will now show FULL
FEATURES and ON will fl ash, press ENTER . HOUR will then show on the
display and the correct me can now be set by using the INC or DEC
arrows. Once the correct hours have been set press ENTER , the correct
minutes, day, month and year can be set the same way. When
completed the display will show
ARE YOU SURE , follow the instruc ons
on the display and it will show INITIALZING followed by SAVING NEW
SETTINGS .
The display will then revert to normal.
THE WEIGHER WILL NOW NEED CALIBRATING.
See page 2
3
2