55
the routing list order one by one (01 is the first priority
and 04 is the lowest priority).
Cyclic Ring: The outgoing call will be hunted based on
the cyclic basis from 01 to 04 and repeat. This is the
recommended method.
Routing List:
The outgoing routing target list (GSM Line 1 to 4, and
Trunk ID 1 to 4) will be used for this route call.
DM Group: Select DM (Digit Manipulation) group 1 to 4 in case it
requires DM to remove the prefix before making the outgoing call.
Create Route Plan>Backup Route
Backup Route Active: Activate the backup route or not.
Outgoing Type: The backup route outgoing call type.
Hunting Type: The hunting method will be used for this route.
Please refer to the Primary Route.
Routing List: The backup routing target list will be used for this
route.
Reroute DM Group: Select DM group 1 to 4 in case the backup
required the DM before to make the call. The DNIS is unchanged by
the primary route DM and same as the DNIS before routing. For
example, the DNIS is 886282265699 and primary DM group remove
886 and use it (DNIS = 282265699) to make call. When backup route
is started, the DNIS is still unchanged as 886282265699. This makes
the DM easy to predict and implement.
There are two special default routes,
VOIP Default Route
and
GSM
default Route
, are used as the default routing when there is not any
other routing are matched. It is not recommended to disable these 2
default routes. The GSM default route is used when a GSM incoming call’s
default routing. VOIP default route is used for a VOIP incoming call’s
default routing.