WELLTECH WellGate 3511N, Техническое руководство

Страница: 61 / 108

WellGate 3511N Technical Manual EN-V100
Copyright © 2007 Welltech Computer Co., Ltd. All right reserved. 61
„ FXS
Here is to set VoIP Phone related configurations.
¾ SIP Account
1) Display Name: Set SIP Phone display name for caller ID information.
2) Number: Set registering Phone number.
3) Login ID: If Proxy server needs registration authentication please input Login ID here.
4) Password: If Proxy server needs registration authentication please input password here.
¾ SIP Proxy
1) Display Name: Set Phone display name for caller ID information
2) Number: Set registering Phone number.
3) Login ID: If Proxy server needs registration authentication please input Login ID here.
4) Password: If Proxy server needs registration authentication please input password here
SIP Proxy
5) Proxy : Check to enable Proxy mode.
6) Proxy Addr: If user enable Proxy mode, please input Proxy address.
7) Proxy Port: If user enable Proxy mode, please input Proxy port.
8) SIP Domain: Set SIP domain name for SIP signaling.
9) Reg Expire(sec): Set expire time of registration. WG3511N will keep re-registering to
proxy server before expire timed out
10) Outbound Proxy : Check to enable Outbound Proxy mode.
11) Outbound Proxy Addr: If user enables Outbound Proxy, please input Outbound Proxy
address.
12) Outbound Proxy Port: If user enables Outbound Proxy, please input Outbound Proxy port.
13) Nortel SoftSwitch: Check to enable Nortel SIP PING function. Please only used it for
Nortel softswitch.
14) Register Status: Here will display SIP account register status.
¾ NAT Traversal
1) Stun : check to enable STUN function.
2) Stun Server Addr: If user enables STUN function, please input STUN Server address.
3) Stun Server Port: If user enables STUN function, please input STUN Server port.
¾ SIP Advanced
1) SIP Port: Set local SIP listening port.
2) Media Port: Set RTP port for sending voice data.
3) DTMF Relay: Select DTMF Relay to be In band, RFC 2833, or SIP INFO.
4) RFC2833 Payload Type: If user select DTMF as RFC 2833 type, here can modify RFC
2833 payload type.