8
Fig.2
Change Default IP Network:
Step 3:
After successfully logon to the system, we need to change the
network configuration. Click
Device Setting > Network
to setup the service
network interface (WAN) parameters. Enter the desired IP address ( IPv4 or
IPv6 ), Subnet mask and default gateway or select “DHCP” or “PPPOE”. Apply
the change by clicking
Apply
button as fig (Fig.3).
Note: If your WAN port is setting in the 10.x.x.x segment IP address, please
make sure that you also need to change the LAN port to other segment such as
192.168.x.x
(Fig.3)
Содержание WELLGATE 2522
Страница 1: ...WellGate 2522 User Guide...
Страница 64: ...64 Appendix A Call Processing Flow Wellgate 2540...
