WELLTECH WELLGATE 2522, Руководство пользователя

Страница: 32 / 68

32
Disable: Send silence packets as normal voice packet (no silence
detection)
RTP Basic Port: The RTP starting port. Each channel will be added
additional 10. For example, the RTP basic port is 16384, thus call 1 will
use 16384 while call 2 will use 16394 and etc.
RTP QoS Type: IP QoS tag for RTP stream
DiffServ: The differentiated service QoS tag will be used.
Input DSCP value 0-63 for DSCP.
TOS: Type of Service which include IP precedence value and
TOS.
> Tone
The setting page is used to setup the tone to be generated (FXS) or
detected(FXO). The detected tone is the Disconnect 1 & 2
(for FXO use) and
the others are for generating (when FXS received the “bye” from IP side
or waiting time out by analog phone which keeps handset pick up, it
will send busy tone to analog phone) . To recognize correct disconnect
tone is very important for PSTN status supervision to release FXO port after
call was dropped.
Please use Country Template to select your local country profile which will be
applied. Click to load those country tone parameters to system and change if
it is necessary.
For those countries are not showed in the list, please select a
closed country and edit tone parameters to match your country. You can send
an email with the tone definition to Welltech if you would like to put your
country tone into the list.