SIP SIP-Phone Administration Guide
48
3. –px
: set proxy server IP address or URL address (
sip –px “IP address or URL of
Proxy server”
).
4. –pxport:
set listening port of Proxy server.
5. –outpx:
set IP address of outbound proxy server. After user set outbound proxy, all
packets form SIP-Phone will be sent to outbound proxy server.
6. –prefix:
set prefix string. If user ID contains alphabets, user can set it as prefix
string here. For example, if Account Name is 123, SIP-Phone will sent out
messages as Account Name @”IP address of Proxy”, if user set prefix as abc,
SIP-Phone will set out as abc123@”IP address of Proxy”. This function is for special
proxy server.
7. –line
: identify one number for the SIP-Phone to register to the Proxy
(SIP –line
“line number”).
Note:
In proxy mode please remember to set user account information under
security command.
8. –pbsearch:
enable/disable phone book search function under Proxy Mode. If user
enabled this function, SIP-Phone will search dialed number in phone book to see if
there is any matched table before send to Proxy server, and if there is a matched
data in phone book, SIP-Phone will make call to related IP address.
9. –expire:
set expire time of registration. SIP-Phone will keep re-registering to proxy
server before expire timed out.
10. –port:
set listening UDP port or SIP-Phone.
11. –rtp:
set RTP port number. SIP-Phone will use this port to send and receive voice.
