LAN Phone 101/201 User Manual Guide
Document Ver.: 2.0
LAN Phone Ver:lp2.100.
30
7.
-mindelay
:set minimum delay of jitter buffer(0~150)
8.
-maxdealy
:set maximum delay of jitter buffer(0~150)
Note: It is for advanced administrator use only. Please ask your distributor before
changing any settings of this command.
15. [tos] command
This command is for setting IP packet TOS values to determine IP Packets priority on network.
1.
: display current TOS values configurations.
2.
-rtptype
: configure TOS type of RTP packets from 0 to 7
3.
-rtcptype
: configure TOS type of RTCP packets from 0 to 7
4.
-rtpdelay
: configure RTP packets as normal delay or low delay
5.
-rtcpdelay
: configure RTCP packets as normal delay or low delay
6.
-rtpthruput
: configure RTP packets as normal throughput or high throughput
7.
-rtcpthruput
: configure RTCP packets as normal throughput or high throughput
8.
-rtpreliab
: configure RTP packets as normal reliability or high reliability
9.
-rtcpreliab
: configure RTCP packets as normal reliability or high reliability
Note:
1. This command won’t be functional until network environment can be capable
