LAN Phone 101/201 User Manual Guide
Document Ver.: 2.0
LAN Phone Ver:lp2.100.
23
9. [pbook] command
The command is for Peer-to-Peer Mode use only. Therefore, VoIP products such as LAN
Phone 101/201 that support Peer-to-Peer Mode are also available to be addressed on the LAN
Phone 101/201 phone book.
1.
: display phone book data. User can print all data in phone book by command
(
pbook –print
). Furthermore, user can also print only a section of data by indicate
parameter 'start_record' and 'end_record' (
pbook –print “start prefix” “end prefix”
). If
parameter 'end_record' is omitted, only record 'start_record' will be display (
pbook –print
“start prefix”)
.
2.
-add
: add a new record in phone book table by give a name and e164 number for the
Gateway / Terminal IP address .
(
pbook –add name “X” ip “xxx.xxx.xxx.xxx” e164 “X”
)
User can set IP or URL address( Domain Name Server must be configured. Please refer to
6.
[ifaddr] command
)
3.
-search
: search any record such as ip address, name and e164 addressed on the phone book.
4.
-delete
: delete a record with index listed in phone book table. (
pbook –delete “index
number”
)
5.
-insert
: insert an record in specified index of phone book.
6.
-modify
: modify any record that has addressed to index number. The name, IP address and
e164 number should be modified together in one
modify
command.
(
pbook –modify “index” name “X” ip “xxx.xxx.xxx.xxx” e164 “X”
)
Note: Please dial “#” after dial e.164 of pbook .
